PP bottle Induction Cap Seal Liner
PP bottle Induction Cap Seal Liner (one-piece type) is an induction lining material consisting of an aluminum foil layer with an appropriate heat seal layer for PP bottles & containers. No foam or pulpboard paper backing is coming with this kind of heat aluminum foil seal liner.
PP bottle Induction Cap seal liner can be used in a very wide range of industries from pharmaceutical products to industrial lubricants or chemicals.
Some clients new to induction sealing method ask how to apply PP induction cap seal liner? The answer is it too easy. The induction cap seal material should be inserted into the PP Bottle or container closure. After the product is filled into the bottle, the cap seal liner
should be applied to the container. At the end bottle should be sealed by an induction sealing machine (whether hand held or automatic induction sealer). In order for the PP induction cap seal liner to function correctly, the closure must have sufficient means of retaining behind a retention bead while allowing the liner to rotate freely. The closure must press the induction liner firmly on the PP bottle neck. Otherwise a strong sealing won’t achieve even by using a high quality one-piece induction heat seal liner inside the closure of the PP bottle.
Induction cap seal liner for PP bottle is one of the best, most popular and cheapest sealing solutions for plastic PP bottles & containers. PP bottle induction cap seal liner can be applied on a very wide range of products including:
- Pharmaceutical Products (Tablet bottles Sealing, Pill Bottles Sealing, Capsule Bottle sealing, Cream Container sealing etc.)
- Food & beverages (Chocolate Cream, Juice, Edible Oils, Dressing & Sauces etc.)
- Agrochemicals (Pesticides)
- Lubricants (Motor Oil, Grease, Gearbox lubricants)
PP induction cap seal liner is available in one piece & two piece type. Both 1 pc and 2 pc type induction seal liners will deliver consistent and reliable strong induction sealing. Manufacturers will ensure that the product pack remains intact and the product remains ‘factory fresh’ until it is going to be used by their clients. The difference of the one-piece and two-piece cap seal liner is in the number of layers and the backing material. In 1 pc induction liner there is no backing layer. In the two pieces type there would be a backing paper or PE foam, it will act as a secondary liner coming with the aluminum foil seal, it will remain in the bottle closure after the induction procedure is done. PP bottle induction cap seal liner is our best recommendation for polypropylene bottle sealing.