One-Piece Glass Induction Seal Liner
One-Piece Glass Induction Seal Liner is a one of the most useful heat seal liners. It has at least 3 layers including backing foam (PE foam) layer, aluminum foil and a polymer coated on the aluminum layer. The coating layer on the 1 pc Glass induction liner can provide a very strong bond with Glass bottles, jars & containers. The aluminum induction seal is a high-performance barrier that will prevent ingress or egress of moisture and gases. Therefore it ensures your product arrive to the consumer as fresh as the packaging day.
One-Piece Glass Induction Seal Liner also can act as a secure tamper evident liner. Therefore it gives the manufacturer and the consumer that the product remains completely intact during the shipment, storage and sale procedure. It will significantly increase the customer’s confidence in your product & brand name.
One-Piece Glass Induction Seal Liner (cap seal liners) can be used to seal a very wide range of products including:
- Food Products
- Pharmaceutical Products (Tablets, Pills, Powders)
- Dry Chemicals
- Herbal medicine
One of the other great advantages of using One-Piece Glass Induction Seal Liner backing is leakage prevention. As far as the seal liner is on the bottle container it will avoid leakage. The 1 pc PP induction liner will usually apply to the products that do not need a secondary liner inside the container lid. Mostly the products that seal with 1 pc Glass induction liner will be used immediately after the seal is broken or in a very short period of time. But in 2 pc seal liners, a paper or foam layer will remain in the cap and act as a secondary liner after the liner is removed.
Glass Induction Seal Liner
One-Piece Glass Induction Seal Liner would be available in different forms. We are able to supply you with 1 pc induction liner in Roll, Tape and also disc pre-cut liners. We can slit the rolls and tapes to the widths as per your requirement. If you are using a punching and inserting machine, then aluminum seal tape or roll would be the best for you. Also pre-cut disc liners would be possible to supply for clients who do not use punching machines. We may test your bottle or container to measure the best cap seal liner diameter you should use.
One-Piece Liner is one of our best sellers in cap seal and cap lining materials during the past years. As an induction seal manufacturer we are exporting 1 pc Glass seal liners to so many different countries all over the world. Please kindly check our Paper-Back PE induction cap seal liners as well. Also you can check our partner company website on plastic bottles here.