Two-Piece PET Induction Seal Liner
Two-Piece PET Induction Seal Liner is a one of the most useful heat seal liners. It has at least 4 layers including backing layer (PE foam or Pulpboard), wax, aluminum foil and a polymer coated on the aluminum layer. In 2 pc PET Induction seal liner the coating layer can provide a very strong bond with PET bottles & containers. The aluminum induction seal is a high-performance barrier that will prevent ingress or egress of moisture and gases. Therefore it ensures your product arrive to the consumer as fresh as the packaging day.
Two-Piece PET Induction Seal Liner also can act as a secure tamper evident liner. Therefore it gives the manufacturer and the consumer that the product remains completely intact during the shipment, storage and sale procedure. It will significantly increase the customer’s confidence in your product & brand name.
Two-Piece PET Induction Seal Liner (cap seal liners) can be used to seal a very wide range of products including:
– Food & beverages
– Pharmaceutical Products
– Detergents and Chemicals
– Agrochemicals (Pesticides & Fertilizers)
– Herbal medicine
One of the other great advantages of using Two-Piece PET Induction Seal Liner is leakage prevention. As far as the seal liner is on the bottle container it will avoid leakage. The 2 pc induction liner will usually apply to the products that need a secondary liner inside the container lid. Mostly the products that seal with 2 pc induction liner will be used in a longer period than these sealed with 2 pc foil seal after the seal is broken. The paper or the foam backing will remain in the cap and protect the half used product inside the container from leakage, loss of moisture or aroma and for the dry products, will protect them from moistening in humid areas.
PET Induction Seal Liner
Two-Piece PET Induction Seal Liner would be available in different forms. We are able to supply you with 2 pc induction liners in Roll, Tape and also disc pre-cut liners. We are able to slit the rolls and tapes to your desired widths. If you are using a punching and inserting machine, then aluminum seal tape or roll would be a much better choice for you. Also pre-cut disc liners would be possible to supply for clients who do not use punching machines. We may test your bottle or container to measure the best cap seal liner diameter you should apply on your containers.
Two-Piece PET Induction Seal Liner is one of our best sellers in cap seal and cap lining materials during the past decades. As an induction seal manufacturer we are exporting 2 pc PET Induction Seal Liner to so many different countries all over the world. Please kindly check our One-Piece PET induction cap seal liners as well. Also you can check our partner company website on plastic bottles here.
